





PANELTIVA · MOISTURE RESISTANT MDF
Moisture resistant, not waterproof. Finished components require appropriate sealing, especially at cut edges, drilled areas and exposed joints.
Paneltiva supplies moisture-resistant MDF (MR MDF) as a substrate for vanity and bathroom furniture manufacturers, kitchen cabinetry and humid-interior joinery — not finished cabinets or vanities. Buyers cut, edge-seal and finish the panels in their own factories. Moisture resistant is not waterproof: performance depends on grade, edge sealing, finish, installation and ventilation.
APPLICATIONS
Choose the board around the finished component, exposure conditions, fabrication method and destination-market requirement.

Vanity & bathroom furniture substrate
Specifiers and factories that build vanity carcasses, vanity doors and bathroom furniture commonly enquire MR MDF when the finished component will sit in a ventilated humid interior.

For cabinet components requiring a moisture-resistant substrate and controlled finishing process.

For repeatable furniture and interior packages where specification and documentation must be coordinated.

For utility cabinetry and interior joinery exposed to intermittent humidity rather than direct or standing water.
PRODUCT & PROCESSING GUIDANCE
MR MDF improves suitability for humid interior conditions, but the finished result also depends on board selection, edge treatment, surface finishing, installation and ventilation.

Board grade, fabrication and sealing should be reviewed together against the finished application.
PRODUCT QUALIFICATION
Technical properties are specification-specific. Density, swelling, tolerance and emission performance should be taken from the data for the offered thickness and production route—not generalized across every MR MDF board.
Confirm the moisture-resistant grade and applicable test method for the offered product.
| Density | 730 kg/m³ |
|---|---|
| Moisture content | 5.9% |
| Bending strength (MOR) | 25.6 MPa |
| Modulus of elasticity (MOE) | 2,620 MPa |
| Internal bond | 0.65 MPa |
| Thickness swelling (24 h) | 7.0% |
| Formaldehyde emission | 0.08 (E1) |
Typical values for the offered route / confirm with order. Full technical data (PDF)
Thickness & size (enquiry / order confirmation)
Common enquiry thicknesses include 6 / 9 / 12 / 15 / 18 / 25 mm.
Common sheet format: 4 × 8 ft (1220 × 2440 mm). 4 × 9 ft (1220 × 2745 mm) and other formats (including 4 × 10 / oversized) are subject to order confirmation. Confirm tolerance, packing and loading with the offered SKU. See Packaging & Loading for export packing examples.

Common sheet reference: 1220 × 2440 mm (4 × 8). 1220 × 2745 mm (4 × 9) and other formats subject to order confirmation.
When a BOQ or import specification names an emission or board requirement, we match the enquiry to an offered production route and confirm evidence against that SKU — we do not claim that every MR board in supply meets every named market document.
Published typical values on this page describe an offered enquiry route; final supply is always subject to exact SKU / order confirmation.
Need a decorative face on an MR core for kitchen or humid interiors? → Melamine MDF (specify MR substrate + décor). Application pages: MDF for Kitchen Cabinet · MDF for Door Manufacturing (raw MR board entry).
TECHNICAL DATA & DOCUMENTATION
Select the documents relevant to your product specification. Product-specific documents are reviewed against the offered grade and order requirements before release.
Select one or more documents to continue.
CONTROLLED DOCUMENT REQUEST
BUYER FAQ
No. MR MDF is intended for furniture and joinery in humid interior conditions. It should not be used for prolonged direct water contact, immersion or exterior exposure without a separately qualified system.
It can be suitable for vanity and bathroom-furniture components when the exact grade, component design, edge sealing, finish, installation and ventilation are appropriate for the exposure conditions.
Thickness depends on the component design, span, fixing, machining and finish. The 18 mm × 1220 × 2440 mm format is a practical enquiry starting point, while final availability is confirmed with the quotation.
No. Green dye may help identify a product route, but colour alone is not proof of performance. Review the relevant technical data and product-specific documentation.
Yes. FSC-certified supply is available for qualifying grades, and EUDR due-diligence documentation can be provided for EU importers. Exact certificate scope and documents are confirmed per product and order — we do not publish logos or certificate numbers on this page.
Yes. Use the sample request with your selected thickness, size, emission requirement, application and intended finish so the relevant sample route can be reviewed.
MR MDF is commonly considered for humid interior furniture when edge sealing, finish and installation match the exposure. It is not waterproof and is not for prolonged water contact or exterior use without a qualified system.
Tell us the required emission route and destination. Applicable documents (for example E1-oriented grades or other named routes) are confirmed against the offered production specification — not assumed.