Roller coating
UV or pigmented roller lines for high-volume furniture and door faces. Face flatness and sanding consistency reduce reject rates.




PANELTIVA · PAINT-GRADE MDF
Paint-grade (lacquer-grade) MDF for coating lines — roller coating, spray paint/lacquer and electrostatic powder coating — for furniture and fit-out factories importing into the EU and Latin America.
Paint-grade MDF (also searched as lacquer-grade MDF or roller-coating MDF) is selected for factories that coat flat panels: furniture doors, cabinet fronts, wall panels and similar parts. Buyers in the EU and Latin America typically ask for a smooth, consistently sanded face, predictable absorption and documents matched to the offered board — not a generic SKU with stock figures on the website.
UV or pigmented roller lines for high-volume furniture and door faces. Face flatness and sanding consistency reduce reject rates.
Spray systems for pigmented or clear lacquer finishes on doors, cabinets and interior components.
Where powder systems are used on suitable MDF substrates — confirm process and board together on quotation.
| Focus | Paint-grade MDF | CNC Grade MDF |
|---|---|---|
| Primary ask | Flat-face coating substrate | Routing, fluting, deep milling |
| When coating happens | On the supplied face (roller / spray / powder) | Often after profiling; edge quality after machining comes first |
| Start page | This page | CNC Grade MDF |
Sanding-before-coating photos on this site include CNC / dense-panel prep imagery used to illustrate surface preparation — they are not a claim that every paint-grade shipment is CNC-routed.
Related specialty routes: E0 / ENF · HPL substrate MDF · Moulding blanks · Specialty MDF grades · MDF products hub
It is MDF selected as a coating substrate — for roller coating, spray finishing or electrostatic powder coating — where face smoothness, sanding quality and stable absorption matter more than for commodity furniture board. Exact sanding grit and thickness are confirmed on quotation.
Paint-grade MDF is specified for flat-face coating lines (roller, spray, powder). CNC Grade MDF is specified for routing, fluting and deep milling where edge definition after machining comes first — coated after profiling when needed. See CNC Grade MDF for machining-led programmes.
Typical enquiries cover UV or pigmented roller coating, spray paint / lacquer systems, and electrostatic powder coating on suitable substrates. Share your coating system and end use so we can match board and documents.
Common furniture and door thicknesses and 1220 × 2440 mm formats are typical enquiry starting points. Availability is confirmed per order — this page does not list stock volumes.
Emission route (for example E1, CARB P2, or E0/ENF where offered) and FSC-certified supply with EUDR due-diligence documentation for qualifying grades can be discussed on quotation. Exact scope is confirmed per product and order.
No invented lab values are published here. TDS and any matching test reports are released against the quoted SKU after enquiry.
Send coating process, thickness, size, quantity, destination and any emission or documentation requirements. We will propose a suitable board and document set — without publishing stock volumes or invented test numbers on this page.