Skip to content
Quote
Menu

Paneltiva · PRODUCT DATABASE

Melamine MDF (TFL) for Cabinets, Wardrobes & RTA — Décor, Face & Substrate Matched to Enquiry

Melamine-faced MDF combines an MDF substrate with a decorative surface for furniture and cabinet production.

Confirm substrate grade, decor, finish, face construction, emission requirement and matching accessories as one SKU.

Key Specifications

Product familyMelamine-faced MDF
SurfaceDecor and finish selection
Primary useFurniture and RTA
Evidence statusSample approval required

Published values describe the current enquiry route. Final supply must be confirmed against the quoted SKU, order quantity, production schedule and supporting documents.

How to specify Melamine MDF / TFL

Melamine-faced MDF (also searched as TFL — thermally fused laminate on MDF) is a decorative panel for furniture and cabinet factories. Paneltiva supplies the panel; we do not manufacture finished cabinets, wardrobes or vanities. A complete enquiry should state décor, face construction, substrate, thickness, size and emission / market requirement together as one SKU.

Décor — Walnut / Oak woodgrain
Woodgrain routes commonly requested include Walnut and Oak. Colour / décor codes are enquiry-based. Send your supplier code, physical sample or preferred family; final décor availability and visual tolerance are confirmed per production route and order. (No public example décor codes on this site.)

Face — B/S · O/S

  • B/S (both sides) — decorative melamine on both faces.
  • O/S (one side) — decorative face on one side; reverse face as agreed (e.g. balancer / white / raw as offered).

The enquiry must specify B/S or O/S. Do not assume double-faced supply.

Substrate — Standard MDF or MR MDF
Melamine can be pressed on standard MDF or moisture-resistant MDF. Kitchen, bathroom-adjacent and humid-interior applications usually lean MR substrate — confirm on enquiry. For vanity / bathroom furniture language and MR raw-board detail, see Moisture Resistant MDF (vanity substrate copy lives there; this page stays décor + face + substrate matching).

Thicknesses available to enquire
9 / 12 / 18 mm are common enquiry thicknesses for melamine MDF programmes. Other thicknesses (e.g. 15 / 16 / 25 mm) can be reviewed against the offered construction.

Sizes
Common size: 4 × 8 (1220 × 2440 mm). 4 × 9 (1220 × 2745 mm) is subject to order confirmation. Project and oversized formats require production confirmation before acceptance.

Available Thickness

  • Enquire 9 / 12 / 18 mm (and other furniture thicknesses by route)
  • Confirm finished thickness tolerance with the quoted SKU

Available Sizes

  • 1220 × 2440 mm (4 × 8) is a common enquiry format
  • 1220 × 2745 mm (4 × 9) and oversized formats are subject to order confirmation

Density / Performance

  • Substrate density and IB selected for machining and hardware
  • Surface bond and dimensional accuracy confirmed

Surface / Color

  • Solid colours and Walnut / Oak woodgrain enquiry routes
  • Matt, textured or other finishes subject to collection
  • State B/S (both sides) or O/S (one side). Décor codes are matched on enquiry — not held as permanent public SKUs

Certifications / Test Standards

  • Emission and FSC routes apply to the exact construction
  • Decor samples are visual approvals, not compliance documents

A certificate or test report applies only to the product, thickness, construction and scope identified in that document. Availability must be checked before the order is accepted.

Recommended Applications

  • RTA furniture
  • Wardrobes
  • Kitchen cabinets
  • Office furniture

Processing Performance

  • Confirm cutting, chipping and edge-banding trials
  • Hardware performance depends on substrate and fastener system

Packaging & Loading

  • Pallet construction and protective wrapping matched to shipment route
  • Sheet count calculated from thickness, density, pallet allowance and container payload
  • Final loading plan confirmed before order

Open packaging and loading requirements →

FAQ

Can you match a decor code?

Send the supplier/code or physical sample; availability and tolerance must be confirmed.

Is the emission class based only on the MDF core?

The exact finished product construction and applicable evidence must be checked.

Request Melamine MDF Pricing or a Sample

Send the application, thickness, size, quantity, required performance, destination and required documents. We will match the enquiry to the appropriate product record.

Send Your Specification

Applications for cabinets, RTA and retail fixtures

Melamine-faced MDF (and related MFC programmes) is specified when furniture lines need a ready decorative face without on-site painting. Typical importer and factory uses:

  • Kitchen and wardrobe cabinets — match décor, texture and edge-band plan to the offered substrate.
  • RTA / flat-pack furniture — consistent face quality and confirmed sheet sizes for nesting.
  • Retail fixtures and shopfitting — durable décor for displays; confirm wear class expectations with samples.
  • Office and hotel FF&E — where project specs name melamine or laminated MDF.

CPL / décor colour references already in our media library can support sampling conversations — tell us the décor family you need. Final décor availability is confirmed per production route and order.

What importers usually confirm

  • Substrate (MDF vs particle) and thickness
  • Décor code / texture and single vs double face
  • Emission route for the destination market (EU / LatAm / other)
  • Edge band colour match and quantity
  • Packing and mixed-container possibility with other specialty grades

Specialty MDF grades guide → · All MDF grades → · Melamine particle board / MFC →

Importer FAQ

Is melamine MDF the same as melamine particle board (MFC)?

No. Melamine MDF uses an MDF substrate; melamine particle board / MFC uses particleboard. Choose by machining, edge quality, weight and cost. Both can carry decorative faces for cabinets and RTA.

Can EU and LatAm buyers request specific emission grades?

Yes — share the required emission route and destination. Documents are confirmed against the offered SKU, not assumed for every décor.

Is FSC-certified or EUDR-documented melamine MDF available?

FSC-certified supply is available for selected advantage products, and EUDR due-diligence documentation can be prepared for EU importers. Confirm the décor, substrate and claim for your order.

WhatsApp