Recommended starting specification
| Recommended panel | Matched to process, finish, exposure and compliance route. |
|---|---|
| Density | Matched to shelf span and hardware. |
| Typical thickness | Common enquiry: 15 / 16 / 18 / 25 mm. |
| Surface | Smooth, calibrated faces; exact sanding and tolerance confirmed by SKU. |
| Emission / certification | Confirm destination requirement and current evidence for the offered SKU. |
| Trial | Approve machining, pressing or finishing on the buyer’s actual process before recurring orders. |
Why the process fails
Long doors or shelves may bow or creep, while poor screw design can weaken repeated hinge loads.
What the buyer should verify
- Door height and shelf span
- Hinge quantity and fixing pattern
- Decorative face and edge system
Selection rationale
Large components require stiffness and hardware calculations alongside decorative selection.
Woodgrain melamine & long sheets for wardrobe lines
Wardrobe factories often specify melamine MDF with Walnut or Oak woodgrain décors, stating B/S (both sides) or O/S (one side) on the enquiry. Décor codes are enquiry-based (see Melamine page for matching notes — no public example décor codes).
For tall doors and long carcass parts, enquire 4 × 9 (1220 × 2745 mm) in addition to standard 4 × 8 (1220 × 2440 mm) — 4 × 9 is subject to order confirmation. Oversized programmes may also use our large-size route.
Paneltiva supplies the board; customers manufacture finished wardrobes. Spec detail: Melamine MDF · Large Size MDF · raw / humid components: MR MDF when required.
