Skip to content
Quote
Menu

Application decision page · Door Industry

MDF for Door Manufacturing

Select MDF around door construction, routing depth, pressing, finish and dimensional stability.

Recommended starting specification

Recommended panel Matched to process, finish, exposure and compliance route.
Density Typically application-led; confirm core profile and internal bond.
Typical thickness Common enquiry: 6 / 12 / 15 / 18 / 25 mm (include 6 mm when skins are in scope). MR vs standard substrate stated on enquiry.
Surface Smooth, calibrated faces; exact sanding and tolerance confirmed by SKU.
Emission / certification Confirm destination requirement and current evidence for the offered SKU.
Trial Approve machining, pressing or finishing on the buyer’s actual process before recurring orders.

Why the process fails

Wrong density profile, moisture balance or press conditions can cause telegraphing, bowing, weak profiles or finish defects.

What the buyer should verify

  • Door type and construction
  • Press temperature, pressure and cycle
  • Profile depth, edge design and final coating

Selection rationale

Flat slab, routed, wrapped and laminated doors need different combinations of core consistency, surface and moisture control.

MR raw board entry points (6 mm & 25 mm)

Door programmes sometimes call for moisture-resistant raw MDF as skins, rails/stiles blanks or core-related components. Two frequent enquiry entry points:

  • 25 mm MR raw board — thicker components / constructions where buyers already list 25 mm on door BOQs.
  • 6 mm MR raw board — thinner skins / layered constructions (confirm machining, press and moisture plan).

Both are enquiry routes matched to the offered MR grade and subject to exact SKU / order confirmation. Full MR grade, sealing and humid-use guidance: Moisture Resistant MDF.

Paneltiva supplies panels / blanks; we do not manufacture finished doors. Confirm density profile, IB, emission route and press conditions with a production trial.

WhatsApp